Sony ILX-LR1 with TOPODRONE LR1 PPK Dual Gimbal M400/M350 Kit

Sony ILX-LR1 with TOPODRONE LR1 PPK Dual Gimbal M400/M350 Kit

The Sony ILX-LR1 with TOPODRONE LR1 PPK Dual Gimbal M400/M350 Kit is a complete high-precision aerial surveying solution combining two Sony ILX-LR1 full-frame cameras, two TOPODRONE LR1 PPK GNSS systems, and dedicated dual gimbal connectors for DJI Matrice 350 and DJI Matrice 400 platforms.

The system enables simultaneous dual-payload operation with synchronised image capture, enabling parallel data acquisition within a single flight. This significantly increases productivity and reduces operational time for large-scale mapping, corridor surveys and complex inspection tasks.

Designed for professional UAV photogrammetry workflows, the solution integrates seamlessly with both platforms:

• direct dual gimbal integration on DJI Matrice 350;
• integration via X-Port and E-Port V2 (E1/E2) on DJI Matrice 400.

This ensures stable deployment, full camera control from the remote controller and a streamlined PPK processing workflow without the need for RTK corrections.

Key Features

• Dual Sony ILX-LR1 cameras (61 MP full-frame, mechanical shutter);
• Two integrated TOPODRONE LR1 PPK GNSS modules;
• 3–5 cm positioning accuracy using PPK workflows;
• Reduced or no need for ground control points, depending on project requirements;
• Simultaneous dual-payload operation via Dual Gimbal Connector;
• Parallel data acquisition in a single flight mission (DJI remote controller mission planning);
• Compatibility with DJI Matrice 350 dual gimbal interface and DJI Matrice 400 via X-Port and E-Port V2 (E1/E2);
• Camera control from the remote controller (trigger, exposure, settings);
• Integrated GNSS receivers (1408 channels each, 20 Hz logging rate);
• Multi-constellation GNSS support: GPS, GLONASS, BeiDou, Galileo, SBAS, QZSS;
• GNSS data logging to microSD for post-processing workflows;
• Quick-release mounting system for rapid installation of each camera module;
• Payload capacity up to 950 g per mounting position (depending on platform and configuration).

Supported Lenses

The system supports Sony E-mount full-frame lenses that meet payload constraints in terms of weight and dimensions.

Recommended Lenses

• Sony FE 24mm f/2.8 G (SEL24F28G);
• Sony FE 28mm f/2.0 (SEL28F20);
• Sonnar FE 35mm f/2.8 ZA (SEL35F28Z);
• Sony FE 40mm f/2.5 G (SEL40F25G);
• Sony FE 50mm f/2.5 G (SEL50F25G).
• Sigma 17mm f/4.0 DG – increased weight and dimensions;

Compatible (with limitations)

• Sony FE 16mm f/1.8 G (SEL16F18G) – increased weight and front extension;
• Sonnar FE 55mm f/1.8 ZA (SEL55F18Z) – longer form factor;

Multispectral Lenses

• Agrowing Quad 25mm;
• Agrowing Quad 55mm;
• Agrowing Sextuple 22mm.

Other Sony E-mount full-frame lenses may be used provided that their weight and physical dimensions do not exceed system limitations. Use of heavier or longer lenses may affect gimbal balance, flight stability and data acquisition accuracy.

System Description

Dual Camera Configuration

The system operates two Sony ILX-LR1 cameras simultaneously, providing synchronised image acquisition and consistent datasets across the entire survey area.

• increased area coverage per flight;
• reduced number of missions;
• improved efficiency on large-scale and linear projects.

PPK Georeferencing

Each module includes an integrated TOPODRONE LR1 PPK GNSS receiver, delivering reliable centimetre-level positioning accuracy without RTK corrections.

• no base station required during flight operations (PPK processing uses reference data);
• reduced or no need for ground control points during data capture;
• stable performance in challenging GNSS environments.

Dual Gimbal Integration

For DJI Matrice 350:

• installation via dedicated Dual Gimbal Connector;
• direct mounting to the drone;
• stable dual payload configuration.

For DJI Matrice 400:

• installation via X-Port and E-Port V2 (E1/E2);
• seamless integration with DJI payload ecosystem.

• simultaneous operation of two payloads;
• support for payloads up to 950 g per mounting position.

This configuration enables parallel data capture within a single mission, increasing operational efficiency without increasing flight complexity.

Workflow & Integration

• full camera control via DJI remote controller;
• synchronised image capture during flight;
• onboard GNSS data logging;
• post-processing in TOPODRONE Post Processing Pro;
• outputs ready for CAD, GIS and BIM workflows.

Package Contents

• 2 × Sony ILX-LR1 cameras;
• 2 × TOPODRONE LR1 PPK modules;
• Dual Gimbal Connector for DJI Matrice 350;
• Dual Gimbal Connector for DJI Matrice 400;
• X-Port mounting components (for DJI Matrice 400 integration);
• Quick-release mounting assemblies;
• Connection cables;
• microSD cards;
• TOPODRONE Post Processing Pro software licence.

Warranty

12 months from the date of purchase.